Manager@huloda.com Mobile

USD


Home>4.Universal remote control>XHORSE VVDI Remote>For Benz>VVDI BE Key pro full key for Benz 3 button/4button remote key with 315Mhz, The frequency can be changed to 433mhz Note: Default frequency is 315Mhz, Remove PCB FRE resistor change to 433.92Mhz. Also support set frequency by VVDI MB TOOL software.
VVDI BE Key pro full key for Benz 3 button/4button remote  key with 315Mhz, The frequency can be changed to 433mhz  Note: Default frequency is 315Mhz, Remove PCB FRE resistor change to 433.92Mhz. Also support set frequency by VVDI MB TOOL software.

VVDI BE Key pro full key for Benz 3 button/4button remote key with 315Mhz, The frequency can be changed to 433mhz Note: Default frequency is 315Mhz, Remove PCB FRE resistor change to 433.92Mhz. Also support set frequency by VVDI MB TOOL software. Item NO.: VVDI-RK-03B

Write a Review
US$ 14.00
Quantity
Stock ( 190 )

Copy and share this link on social network or send it to your friends

Copy
  • Xhorse VVDI BE Key Pro Improved Version Mercedes-
Product Name VVDI BE Key pro full key for Benz 3 button/4button remote key with 315Mhz, The frequency can be changed to 433mhz Note: Default frequency is 315Mhz, Remove PCB FRE resistor change to 433.92Mhz. Also support set frequency by VVDI MB TOOL software.
Item NO. VVDI-RK-03B
Weight 0.05 kg = 0.1102 lb = 1.7637 oz
Volume 70 CBM
Category 4.Universal remote control > XHORSE VVDI Remote > For Benz
Tag Xhorse VVDI BE Key Pro Improved Version Mercedes-Benz 3 button r
Creation Time 2019-07-27

Xhorse VVDI BE Key Pro Improved Version Mercedes-Benz 3 bVVDI BE Key pro full key for Benz 3 button/4button remote 
key with 315Mhz, The frequency can be changed to 433mhz 
Note: Default frequency is 315Mhz, Remove PCB FRE resistor change to 433.92Mhz. Also support set frequency by VVDI MB TOOL software. 
utton remote key with 434mhz 


1. Applicable List: 705 Moto(1997-2000) NEC(2001-2005) NEC(2006-2010) BGA(after 2011)
 
2. Programmed by : All kinds of MB key programmer such as Digimaster-III ,CKM100, VVDI MB TOOL, AK500 , MBE MB-KEY OBD2, NEC-57 MB-PRO,Etc.
 
3. Frequency: 315MHZ/433MHZ
 
Xhorse VVDI BE Key Pro Features:

More compatibility
New design
High Stability
High reliability
Digital Signature
 
VVDI BE key Pro improvements: 

1. Fix the bug that W164/W639 EIS data doesn't synchronize the key.
2. Fix the bug/fault that the BE key stop work after repeatedly turn ON the ignition without remove key out from EIS/EZS for example with work on diagnostic...switch IGN OFF---ON for erase faults...then car not start
3. Fix the bug/fault of trunk remote open on cars where power lifts on trunk door mainly...
4. Fix the bug that the BE key only sent RF signal for one time, after update, the RF signal can be sent for two times when press and release the key.
5. Modify the rolling algorithm, fix some errors of BE key.
6. Add pre-roll algorithm: the HASH value can roll ahead.
7. Adopt car-grade quartz crystal, improve infrared communication stability.
8. Boost the infrared signal when you press the button. 
9. Support resetting the key frequency between 315MHZ and 433.92 in the way of VVDI MB tool or the PCB SMD resistor

Tip: VVDI MB tool has priority over the SMD resistor, which means if you reset the key frequency with VVDI MB tool at first, the SMD resistor won't work, and you need to use the VVDI MB tool to erase the frequency then use the SMD resistor.
 
The way to reset the frequency with the PCB SMD resistor:

Weld the 1K SMD resistor on the position the arrow points and the frequency is 315MHZ, after remove it will be 433.92MHZ.


No related record found

                                                                                                              


JOIN US ON: