VVDI BE Key pro board for Benz 3 button/4button remote key with 315Mhz, The frequency can be changed to 433.92mhz Item NO.: VVDI-RK-03A

Write a Review Sold (4511)

US$ 11.00

Quantity: Stock ( 87564 )

Estimate Shipping Cost

VVDI BE Key pro board for Benz 3 button/4button remote
key with 315Mhz, The frequency can be changed to 433.92mhz

Product Name	VVDI BE Key pro board for Benz 3 button/4button remote key with 315Mhz, The frequency can be changed to 433.92mhz
Item NO.	VVDI-RK-03A
Weight	0.03 kg = 0.0661 lb = 1.0582 oz
Volume	59 CBM
Category	4.Universal remote control > XHORSE VVDI Remote > For Benz
Tag	VVDI BE Key pro board for Benz 3 button/4button remote key with
Creation Time	2020-02-07

VVDI BE Key pro board for Benz 3 button/4button remote
key with 315Mhz, The frequency can be changed to 433.92mhz
Note: Default frequency is 315Mhz, Remove PCB FRE resistor change to 433.92Mhz. Also support set frequency by VVDI MB TOOL software.

Item Description:

XHORSE VVDI BE Key Pro For Benz V1.5 PCB Remote Key Chip Improved Version Smart Key Shell Can exchange MB BGA Token

Uncut Blade :

Condition: New
Button: 3+1/4 button
Weight: 46g
Electronics/Transponder Chip: Yes
Battery/ Blade: No
This remote only comes with the circuit board. No battery or blade inside.

Xhorse VVDI BE Key Pro Features:
More compatibility
New design
High Stability
High reliability
Digital Signature

VVDI BE key Pro improvements:
1. Fix the bug that W164/W639 EIS data doesn't synchronize the key.
2. Fix the bug/fault that the BE key stop work after repeatedly turn ON the ignition without remove key out from EIS/EZS for example with work on diagnostic...switch IGN OFF---ON for erase faults...then car not start
3. Fix the bug/fault of trunk remote open on cars where power lifts on trunk door mainly...
4. Fix the bug that the BE key only sent RF signal for one time, after update, the RF signal can be sent for two times when press and release the key.
5. Modify the rolling algorithm, fix some errors of BE key.
6. Add pre-roll algorithm: the HASH value can roll ahead.
7. Adopt car-grade quartz crystal, improve infrared communication stability.
8. Boost the infrared signal when you press the button.
9. Support resetting the key frequency between 315MHZ and 433.92 in the way of VVDI MB tool or the PCB SMD resistor

Tip: VVDI MB tool has priority over the SMD resistor, which means if you reset the key frequency with VVDI MB tool at first, the SMD resistor won't work, and you need to use the VVDI MB tool to erase the frequency then use the SMD resistor.

Programmed by :
All kinds of MB key programmer such as Digimaster-III ,CKM100, VVDI MB TOOL, AK500 , MBE MB-KEY OBD2, NEC-57 MB-PRO,Etc.

How to Change Xhorse VVDI BE Key Pro For Benz PCB Frequency?
XHORSE VVDI BE Key Pro For Benz XNBZ01CH Remote Key Chip Improved Version default frequency is 315MHZ,it supported to change frequency to 433mhz. Here we will introduce two ways to change Xhorse For Benz Key PCB frequency.

Method 1.Remove PCB FRE resistor change to 433MHZ.

Method 2.Change Via VVDI MB Tool Software.You can use VVDI MB software check key frequency firstly in EIS Software,other function set frequency.Then it shows 315mhz when you read frequency.Choose 433.92mhz to set,and check frequency again.

Package includes:
1pc x KD Smart Key