Copy and share this link on social network or send it to your friends
CopyProduct Name | Lonsdor KH100 Hand-Held Remote Smart Key Programmer able to access control key, simulate/ generate chip, generate remote (key), detect remote frequency, detect IMMO, unlock for Toyota smart key and etc. |
Item NO. | Lonsdor-pro-03 |
Weight | 0.4 kg = 0.8818 lb = 14.1096 oz |
Volume | 1000 CBM |
Category | 7.Key Programmer > Lonsdor |
Creation Time | 2020-07-19 |
Note:
1- for 48 chips, support copy aftermarket chips/duplicate chips
2- Generate remote key , must be use lonsdor key.
Lonsdor KH100 remote maker Can recognize all kinds of chips, like:
11/12/13/33/40/41/42/44/45/46/47/48/49/4A/4C/60/61/62/63/64/65/66/67/68/69/6A/6B/70/70E/71/
72G/82/83/8C/8A...smart cards
Can provide info in detail, like it's from the dealer or deputy factory, lock or unclock
Can copy chips, incl.
11/12/13/33/42/46/48/4C/60/61/62/63/64/65/66/67/68/69/6A/6B/70E/71/72G/8A(for Toyota H)
Note 1:
11/12/13 - copy chips to T5、JMD King Blue Super Chip、JMD Red Super Chip
33 - copy chips to T5、Blank 7935
42 - copy chips to Blank 7935
46 - copy chips to LKP46、skp 46、CN3、JMD King Blue Super Chip、JMD Red Super Chip
48 - copy chips to 48 (the deputy)
4C/60/61/62/63/64/65/66/67/68/69/6A/6B/70E/71/72G - copy chips to LKP4D、JMD King Blue Super Chip、JMD Red Super Chip
8A ( for Toyota H) - copy chips to TS21
Note 2:
You can copy chips encrypted, but some dealer keys can be read or edited, not copied.If the dealer key cannot be copied, it will not display a "copy" button.
Identify/copy/generate chip:
Multi-vendor chips supported
Especially for Toyota 8A(H) chip Our predominance
Simulate Chip:
Able to simulate 4D/46/48 chips
With built-in super sensory data collector(no interference within 1 meter when collecting data)
Generate remote/smart key:
Dedicated connector to generate remote/smart key Online update supported
Remote generation diagram
Access control/remote frequency
One-click identify and copy IC/ID cards
Copy multi-vendor chops
Detect remote frequency bands with high accuracy
One click identify ID card,able to copy multi-vendor chps,at the back sensor area
Detect super frequency
Detect multiple frequency brands with high accuracy
Lonsdor KH100 Identify Coil
①Search smart induction area
Connect remote key with remote connector, Put KH100’s antenna position. If inductive signal is identified, the device will make sounds, please check if the position is right (as shown below).
②Detect IMMO
Connect remote key with remote connector, Put KH100’s antenna close to key
identification coil, and use key to turn ignition ON. When KH100 buzzer beeps, it means
signal is detected.
Lonsdor KH100 Remote Frequency
Enter this menu, put remote control at the device’s induction area to detect remote frequency.
Lonsdor KH100 Special function
Include: detect infrared signal, unlock for Toyota smart key, More functions, to be continued...
① Detect infrared signal
Put remote control at the infrared signal detection area, press the remote's button once. When the light on KH100's screen is on, it indicates there is infrared signal, otherwise there is no signal (see below pic).
② Unlock for Toyota smart key
Put in smart key, click OK to operate.
Lonsdor KH100 Product features:
Modern appearance design, in line with the operating habits of the public.
Device system comes with operation instructions, easier for you to use.
It covers almost all the functions of the similar products in the market.
Built-in super sensor to collect data (over-range data collection).
Exclusive support for 8A (H chip) generation.
Built-in WIFI module, can connect to network at any time.
Lonsdor KH100 Product parameter
Device dimension: 193MM*88MM*24MM
Screen size: 2.8 inch
Screen resolution: 320X240
Battery: 3.7V 2000MAH
Power: 5V 500MA
Work temperature: -5℃~60℃
USB: USB-B/charge-data transfer
Connector port: PS2-7PIN OD3.5 7PIN , 1.27 spacing, the 2nd PIN: NC
Name | Notes |
Antenna | To induce simulated chip and detect ignition coil |
Display screen | 2.8-inch color screen, resolution: 320X480 |
Induction coil | To identify, copy, generate key chip or remote, etc. |
Port 1 | USB-B port |
Port 2 | Dedicated port for remote’s connector |
Power button | In shut-down state, tap to boot the device. In power-on state, tap to switch to power saving mode. Long press for 3s to shut down |
Remote frequency detection | Put remote in this position to detect its frequency. |
High-frequency detection | To identify and copy IC card. |
Package includes:
1pc x Lonsdor KH100 Hand-Held Remote/Smart Key ProgrammerLonsdor
KH100 Upgrade:
Copyright © 2006-2019 HULODA INC. All Rights Reserved.
No related record found